the clutch cable under the dash is pushing the light guage metal housing up and i have to keep adjusting the cable, the housing is to thin what do i do?
the cast metal is cracking away from the cable, is there some way of strengthing the bracket ?
littlehorn answered 17 years ago
Without seeing how it mounts, I would say you would have to fabricate some kind of bracket or reinforcement on your own. See if you can make a bracket yourself, or call Kia and ask if they have a TSB or a dealership fix for this. You probably aren't the first one to have this happen.
the cast metal is cracking away from the cable, is there some way of strengthing the bracket ?
2001 Kia Rio Base
-
Maintenance & Repair
I have had the car checked several times - put up on the rack, and NObody can find what is causing the loud "clunk" whenever I go over even the slightest imperfection in the road. Motor mounts were c...
2006 Kia Rio Base
-
Maintenance & Repair
The o/d off light is lit up on the dash; how do I turn it back off?
2007 Kia Rio Base
-
Maintenance & Repair
I just bought an '05 Kia Rio with 110,000 miles on it. It has the Check Engine light on and the code reads a misfire in cylinder #3. I changed the spark plugs and wires, hoping this would solve the ...
2005 Kia Rio Base
-
Maintenance & Repair
my kia rio starts fine from a cold start however when the engine reaches running temp and I drive about five to six miles the engine shuts down. Now if I take the spark plugs out and clean them and re...
Kia Rio
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.