I just replaced the drum break shoes, and bled the wheel cylinder, but I can't get the hub bearing to slid over the shoes. Any help would be Appreciated.

Asked by Andrew Feb 12, 2015 at 01:05 AM about the 1998 Ford Contour 4 Dr SE Sedan

Question type: Maintenance & Repair

3,135

honda_ASE_master_tec... answered 9 years ago

Well to start what your trying to slide over the shoes is the drum. The shoes are mounted around the bearing. If you can't slide the drum over the shoes then the shoes are over adjusted. Adjust the shoes until the drum can slide over the shoes with ease. If the hub bearing is a bolt on assembly then it should mount back on the same way it came off, if it was removed for the brake job.

Mark helpful

Your Answer:

I just replaced the drum break shoes, and bled the wheel cylinder, but I can't get the hub bearing to slid over the shoes. Any help would be Appreciated. 1 Answer

1998 Ford Contour 4 Dr SE Sedan

-

Maintenance & Repair
I have a 2000 Ford Contour. I ran a few errands yesterday with no issues. I did not hear any changes in how the car starts or how long it takes. I went out to my car today and it does not turn over. All lights/electricity is on, it makes the sound like its trying to turn on, but will not turn. I bought a new battery hoping that was part of it. That is not the issue, left it plugged in over night and did not drain, so it does not appear to be alternator (which was recently replaced) what else could it be? (I am thinking of the starter, but could it be anything else?) 3 Answers

I ran a few errands yesterday with no issues. I did not hear any changes in how the car starts or how long it takes. I went out to my car today and it does not turn over. All lights/electricity is o...

2000 Ford Contour 4 Dr SE Sedan

-

Maintenance & Repair
I was driving down the road and engine died suddenly. Then pulled over and put it in park . I tried to start it again but it does absolutely nothing no clicking or any thing. Good battery just had it 11 Answers

Engine size is 2.5L V6 24v DOHC , checked battery not the problem . Engine succenly died on the interstate and then won't crank. Starter won't do anything.... Need help

1999 Ford Contour 4 Dr SE Sedan

-

Maintenance & Repair
Driving down the road and engine died suddenly and started putting. Then pulled over and put it in park . I tried to start it again but it does absolutely nothing no clicking or any thing 1 Answer

Driving down the road and engineand and battery died suddenly. Then pulled over and put it in park. I tried to start it again but it does absolutely nothing no clicking or lights. Would wait a whi...

2000 Ford Contour 4 Dr SE Sedan

-

Maintenance & Repair
My 1998 Contour shudders, on then off, on then off... when driving at about 65mph. I just replaced the timing belt and it runs smooth at lower speeds and at idle. What could be the problem? 4 Answers

I recently replaced the timing belt and the car is running smooth at idle and lower speeds. Also, it stalls occasionally but starts up right away.

1998 Ford Contour 4 Dr SE Sedan

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.