Does anyone have diagram /picture of evap hoses?

The code tells you where the problem is not what to replace . The clerk at auto zoo sells parts they are not a technician , Spray some penetrating fluid into the ports when you change sensors/solenoids

This code is telling us you have a lean condition on bank 1. That's the side of the engine where cylinder number one is. Check for any obvious vacuum leaks. Check the exhaust system for leaks between the engine and the upstream oxygen sensor. Fresh air being drawn into the exhaust system past the upstream oxygen sensor will set a false lean code. If you have a plastic intake manifold it's probably cracked and leaking. A problem with the EVAP system will set a different code. Jim