ImFlammable answered 5 years ago
The default position is probably always on until the pcm tells the cluster to turn it off using the data network
okay thanks much that information is very helpful because i was thinking that the car have electrical wires touching each other to keep it on
2003 Mazda Tribute ES V6 4WD
-
Maintenance & Repair
I have a 2001 Mazda Tribute,with 150000 miles on it , the issues started when it is very cold,turn on defrose wipe running, then came cruise control and left signal.Now head light and drive's window i...
2001 Mazda Tribute LX V6
-
Maintenance & Repair
What would cause a growling sound from the back of a 2002 Mazda Tribute
2002 Mazda Tribute ES V6 4WD
-
Maintenance & Repair
I have a 2003 mazda tribute v6 with 170k miles on it..recently it died on me and I was told it was the starter, but after that was replaced come to find out it wasn't the starter..come to find out it ...
2003 Mazda Tribute ES V6 4WD
-
Maintenance & Repair
4 days after an oil change the ABS light came on in my Mazda Tribute. My mechanic first changed the alternator. The car has just over 100K. The mechanic says the ABS is bad. Should he check the ...
2004 Mazda Tribute DX 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.