I have a 2000 Mazda Protege 1.6 engine. It has started to stall when stopped and if it's not doing that when I press the gas pedal down it does not rev or move for several seconds. Spark plugs and wires were changed a year ago and it is saying a misfire is happening on the computer.

I have a 2000 Mazda Protege 1.6 engine. It has started to stall when stopped and if it's not doing that when I press the gas pedal down it does not rev or move for several seconds. Spark plugs and wires were changed a year ago and it is saying a misfire is happening on the computer. 3 Answers

The head gasket on a 1995 mazda protege blew, I purchased a new one for 125.00 and had it serviced? for 100.00 and will replace is this good 4 Answers

My uncle owns a garage it has 110,000 miles but only thing wrong head gasket as I mentioned above Uncle giving me the car

warm up normally if it's idling, but when I start driving it cools back down. If I'm on an interstate or expressway, the needle will drop down to the cold like it was never warm..i am at a loss and wa 1 Answer

warm up normally if it's idling, but when I start driving it cools back down. If I'm on an interstate or expressway, the needle will drop down to the cold like it was never warm..i am at a loss and wa...

I have a 2002 Mazda protege that sqeals horribly belts have been replaced as has the alternator but the squealing persists now I've had someone watch as I turn the shearing wheel either direction and the belt completely stops turning I believe it is the power steering pully but idk if my diagnosis is correct. 4 Answers

When I turn the stearing wheel the belt completely stops the pully so I'm questioning is it a bad pully or a power steering pump going bad

my 1991 mazda protege jumped timing and i am wondering if it is worth fixing i need to know if it is an Interference or none interference type engin 1 Answer

i am trying t findout if my 1991 mazda protege has a non interference type engin or an interference type