coolant

10

Asked by Hallam May 30, 2015 at 01:48 PM about the 1995 Mazda 626 LX V6

Question type: Maintenance & Repair

hi guys i have a 95 mazda 626 2.5 kl changed all parts associated with the radiator i have
even gotten the head gaskets checked and they were fine i also have a 16lb cap on, my
problem is that when i drive long periods and i park the car i can see coolant dripping out
of the over flow bottle, the cooling fans are working and the car is not overheating

1 Answer

FordNut answered 9 years ago

With your car cold, look at the lines on the overflow tank for the 'cold' line. It might just be over full. It should not be past that line, the tank should be only about ¼ full cold.

1 people found this helpful.
Mark helpful

Your Answer:

Related Questions

  • coolant 1 Answer

    hi guys i have a 95 mazda 626 2.5 kl changed all parts associated with the radiator i have even gotten the head gaskets checked and they were fine i also have a 16lb cap on, my problem is that when ...

    1995 Mazda 626 LX V6

    -

    Maintenance & Repair

  • Oil in coolant 1 Answer

    I have an 02 Mazda 626 which was overheating flushed radiator, flushed heater core repaired one hose. Drive for two days and t starts over heating. Last nit I was going to pull coolant temp senso...

    2002 Mazda 626 LX

    -

    Maintenance & Repair

  • 1999 626 2.5L Manual transmission. The car overheats at idle, but cools with higher engine RPM. What causes this? 5 Answers

    My mazda has always ran perfectly temperature wise. The water pump and all belts were replaced 10 months ago. Coolant levels are fine. Both cooling fans are functioning properly. Yet a couple of days ...

    1999 Mazda 626 LX V6

    -

    Maintenance & Repair

  • Trouble figuring out error code when turning 4 Answers

    Hi. I've begun seeing my check engine light appear, when i'm turning my steering wheel at stationary, or moving at low speeds around sharper corners. The car does not give me an error code, when i w...

    1996 Mazda 626 LX

    -

    Maintenance & Repair

  • Where is the plug to drain the engine block? 5 Answers

    I am trying to drain the engine coolant and cannot find the plug. Chilton does not show where it is.

    1988 Mazda 626

    -

    Maintenance & Repair

Shortcuts

Search Mazda 626 Questions

CarGurus Experts

  • #1
    littlehorn
    Reputation
    600
  • #2
    Gene Arnett
    Reputation
    280
  • #3
    Daniel Reed
    Reputation
    240
View All

Find great deals from top-rated dealers

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.