change the tranny in my 98 gt...i have all 6 bolts removed but the tranny won't come out...it will move from side to side and up and down so i know its not a bolt...plz help!

change the tranny in my 98 gt...i have all 6 bolts removed but the tranny won't come out...it will move from side to side and up and down so i know its not a bolt...plz help! 2 Answers

my 1988 mustang gt convertible usually runs great but sometimes it idles up and down and will even die. the problem stops when i accelerate but will continue at cruising speed. sometimes it does not happen for days, then when it happens it can last for a few seconds up to a day. i have replaced the cap, rotor, plugs, wires, fuel filter and egr valve. it feels like a vacuum issue, but i do not think a vacuum issue would come and go like this. i am lost! please help 3 Answers

my 1988 mustang gt convertible usually runs great but sometimes it idles up and down and will even die. the problem stops when i accelerate but will continue at cruising speed. sometimes it does not...

I have a 1998 mustang. Can floor the fas pedal and I won't accelerate in fact I decellerate and u can hear it sputtering out my exaust. And most of the time I can't go over 20 mph plz help. 7 Answers

I have to barely tap the gas pedal to even move tranny fluid is good tho.

i have a 2000 ford mustang v6 guages went crazy when i backed up and the car died, put it park - restarted it. ran fine till i put in drive, guages bounced between max and minimum then it died again and now will not start. the remote trunk key chain - when i push to unlock the trunk or any of the other functions make the relays click under the dash. so is it my relays or something else 3 Answers

i have a 2000 ford mustang v6 guages went crazy when i backed up and the car died, put it park - restarted it. ran fine till i put in drive, guages bounced between max and minimum then it died again...

My car will go and accelerate but I have to rev it up to about 5-6000 RPM’s before it moves. This all started happening when I set the brake. Does anyone have any tips or Awnsers to my problem? 1 Answer

My car will go and accelerate but I have to rev it up to about 5-6000 RPM’s before it moves. This all started happening when I set the brake. Does anyone have any tips or Awnsers to my problem? Oh ...