Have a 2000 mercury mountaineer with rear transmission noise all wheel drive 5.0 v 8 but don't know exactly what my vehicle is for parts

Asked by coneflower Dec 13, 2014 at 12:26 PM about the 2000 Mercury Mountaineer 4WD

Question type: Maintenance & Repair

My vehicle manual does not specify my vehicle exactly, how can I find out more
information on

11,075

ytlas answered 10 years ago

You can try purchasing a Service Manual. Many companies put out service manuals from fairly basic to very precise. http://www.amazon.com/Explorer-91-2001-Mercury-Mountaineer-Automotive/dp/1563924420/ref=sr_1_1?ie=UTF8&qid=1418499297&sr=8-1&keywords=2000+mercury+mountaineer+service+manuals&pebp=1418499315145

Mark helpful

Your Answer:

Have a 2000 mercury mountaineer with rear transmission noise all wheel drive 5.0 v 8 but don't know exactly what my vehicle is for parts 1 Answer

My vehicle manual does not specify my vehicle exactly, how can I find out more information on

2000 Mercury Mountaineer 4WD

-

Maintenance & Repair
I need to know what the code p1000 means for my Mercury mountaineer 2004 2 Answers

I have a 2004 Mercury mountaineer all around drive and the code p1000 and I need to know what it is

2004 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair
My 2003 Mountaineer V-8 AWD SUV, transmission gear shifter will jump into neutral whether I drive on a bumpy or smooth road way, why? 2 Answers

Has been jumping out of gear for almost 2 years. This is an automatic. Sometimes when I put it into reverse, I have to give it gas to go into reverse. Otherwise, this piece of junk will just sit there...

2003 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair
I need a part but cannot find it. I do not know what it is called. Anyone? 2 Answers

I have a 2006 Mercury Mountaineer. The rear glass hatch had a metal ring mounted to it. When the glass shut, this metal ring slid into the latch which is what held the glass closed. This ring broke ...

2006 Mercury Mountaineer Premier RWD

-

Maintenance & Repair
I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. The digital display says that there is a "DOOR AJAR". I have checked all the doors as bet I can and they appear closed. BUT the interior lights remain on and the alarm will not set because off the ajar message. Am I missing something? Is the computer having a brain cramp.? I can get the alarm to set if I manually shut off the interior/dash lights too off. then it will work but no interior lights on the dash. This is driving me nuts. Can uou help?Thanks,John 12 Answers

I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. T...

2004 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.