My truck has bren parked for a ling time, how do i treat the gas in order to start the engine without having to replace the fuel pump?

My truck has bren parked for a ling time, how do i treat the gas in order to start the engine without having to replace the fuel pump? 1 Answer

I have a 1991 Ford ranger and I have burnt up two fuel pumps due to it running all the time when truck is on. Any Ideas on whats wrong? 1 Answer

My ranger is burning up fuel pumps, I am on my second fuel pump. The fuel pump runs even when the truck is shut off. I have to remove a battery terminal to keep from eating fuel pump up. Help!

not receving any power to fuel pump and check engine light does not come on when I turn the key to run without starting the vehicle 1 Answer

Ive replaced the pump, fuses, relay, pcm, icm, and nothing has been worked

my entire truck has power, the radio works thelights,ect ,ect) the starter wont begin to turn over and it wont start 65 Answers

the truck has power the battery has 12.5 ohms i think the lights in the truck work and are on the radio is on and all the head lights and brake lights work when i go to start it is dose nothing the s...

What is the thumping noise in my truck after having the water pump replaced? 2 Answers

Only when the heater is on, doesn't matter which mode A/C, defrost or vent. The thumping is fairly consistent at about 1 second intervals and varies in volume from soft to heard from across the str...