richardmastin answered 11 years ago
it depends on how it was being driven at the time erratic? if not you could be lucky normally it will bend the valves as the pistons will be out of sinc so head gasket new valves will normally be required bear in mind the new valves will have to be lapped in hope this helps regards rich
2005 Mitsubishi Galant SE
-
Maintenance & Repair
changed water pump replaced timing belt ran great than stopped now there is oil in the spark plugs and car wont start why?
2005 Mitsubishi Galant LS
-
Maintenance & Repair
When it stopped on me I had a small amount of smoke from under the drivers side. It was gone before I opened the hood. It smaller like a belt. But none of them were broken. The man that is lookin...
1991 Mitsubishi Galant
-
Maintenance & Repair
Car clicking and not wanting to crank immediately and just got a new timing belt spark plugs and oil change
2007 Mitsubishi Galant DE
-
Maintenance & Repair
balancing belt broke and broke the timing belt and bent the valves. replaced crank shaft sensor and cylinder head and distrubrator 1996 Mitsubishi Galant S
1996 Mitsubishi Galant S
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.