tansmition cost, piston missfire 2&3
Asked by Isaiah Apr 23, 2014 at 07:27 PM about the 1998 Mitsubishi Eclipse GS
Question type: Maintenance & Repair
i just bout a 1998 Mitsubishi eclipse and i have 2 questions. i bought a code reader for my car and the codes read that pistons 2 and 3 were misfiring. got bunch of new tools to test it but still have no idea what wrong. second question is the car makes a rattling when the clutch is released in neutral, and it does not rattle when its started in gear with clutch down. my guess is i need a new transmission and if i did get a new transmission how much would it cost to buy it and have some one else instal it. thanks
10 Answers
http://www.obd-codes.com/p0302
http://www.obd-codes.com/p0303
Does it shift out ok? If so rattle probably a clutch, pressure plate and or throw out bearing issue.
2 and 3 are on the same side of the coil pack. Could be coil pack failing. Or injector issues. Have you tried some fuel treatment to clean injectors?
http://autorepair.about.com/library/firing_orders/bl-fo-4850.htm -- check that plug wires are on correctly.
According to your picture the plug wires are correct.
I will check on that, and no I have not tryed fuel treatment yet I'll try it today. Aka -thekid101
The coil pack is brand new, would this also effect the speedo because the engine light is on and the speedo does not work
Sounds like could be an ecu issue. Maybe Daniel will chime in on this he is much better than me on the electronics and how they all work together.
