brake rotor replacement
6 Answers
If in doubt just buy new rotors. But to answer your question the minimum machine spec is 25.05mm/0.986" and must be discarded at 24.45mm/0.963" And I don't know what regular means is. Never done a van myself here is a chart
http://www.motorcraftservice.com/vdirs/vehicles/diesel/schematics/brake_specs_job_aid.pdf Don't worry about the word 'diesel' being in the link. Just means it is a chart for both
http://www.ford-trucks.com/forums/1265811-howto-replace-front-rotors-on-a-1999-e-250-2-wheel-abs.html will go full screen
I don't know what mileage you have on that van crumbob but while you're in there personally I would put new wheel bearings on. Not all that expensive, and no extra work
i am going to do a full around suspention job it has 155K on it