changed plugs wires n i still get no power at times gas to the floor and it put puts to catch up .

changed plugs wires n i still get no power at times gas to the floor and it put puts to catch up . 1 Answer

I have a ford ranger 1987 2.9L when I press on the pedal it sputters and has no power I cleaned the throttle body it does a little better I changed the spark plugs and spark plug wires but I was wondering if any one would know what I could do to fix this problem? 5 Answers

I also put injecter cleaner in it. it seems like power comes back for a while but goes back to sputtering with harldy any power

i have a 1992 ford ranger xlt 2.9L 5sp standard. gears 1-3 are fine. however 4and 5th gear a problem. at 45mph i'll put in to 4th gear and it loses power and shakes/sputters. also in 5th gear. acts like a mis-fire. i changed: plugs/wires, egnition coil, fuel pump/filter/sending unit and fuel pump plug. what's wrong. 5 Answers

why am i losing power, speed, and problems accelerating past 3rd gear?

on a 1997 ford ranger 4.0 enging 5 speed manull transmisions i put new cluth presure plate and slave cylinder and resavore still cant get a clutch pedal to ingage the p plate and also bleed it 1 Answer

still want press p plate is there a diffrents in internal slave cylinder between one for 4 cylinder and v6

1983 Ford ranger. Don't want to start and stay running. Only way it stays running is if you hold the gas to the floor. And even then it spits and sputters and shakes. What could it be? 7 Answers

Don't want to start and stay running. Only way it stays running is if you hold the gas to the floor. And even then it spits and sputters and shakes. What could it be? Tried holding the butterfly shut,...