Check the fluid level and replace if old very OLD Change it completely if that does not solve your problem i think your clutch plates for the transmission is done for . its life is over if simple auto and if CVT the belt has lost its grip that is y it pulls at low speed but slips if going above u have to get it changed from the dealership or a proper mechanic
I agree the tranny has overheated and the clutch burnt up.
1996 Ford Taurus GL
-
Maintenance & Repair
have a 97 ford taurus sho, gotta rev it up to get it into gear, and wont shift into overdrive, and o/d light flashes? any help of what the problem is wuld be appreciated.
1997 Ford Taurus SHO
-
Maintenance & Repair
Changed the starter n pcv valve but still wont start.
1998 Ford Taurus
-
Maintenance & Repair
Sometimes after engine start the doors do not lock automatically, the speedometer does not work and the tranny wont shift. After rolling about half a block the locks kick in and it shifts and the sp...
2000 Ford Taurus
-
Maintenance & Repair
as i was pulling into a parking space my car just turned off. It wasn't the battery. The car will turn back on but wont idle the idle air control valve has been replaced and the fuel filter. If i ...
2006 Ford Taurus
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.