I have a 95 mustang 3.8 i just replaced lifters and push rod cause the rods was bend and and lifters knocked hard i let it run for 30min after i installed new parts and still knocks what should i do

I have a 95 mustang 3.8 i just replaced lifters and push rod cause the rods was bend and and lifters knocked hard i let it run for 30min after i installed new parts and still knocks what should i do 3 Answers

i have a 04 mustang making a tapping sound i replace lifters but sound still present wat could it be 12 Answers

i replaced the lifters but sound didnt go away sound like lifters but like i said just replaced them

how do i set my lifters on a 86 302 roller ho 1.6 4 Answers

i bought this motor and the heads was off and apart i had to put the push rods and all that on the heads but u have to set the lifters i dont no what to set it at

i have a 1996 3.8 232 for mustang i was driveing down the road when alot of white smoke and anti frezze came pouring out my exhaust and anti frezze check engine light started flashing and it was not r 15 Answers

what could it be

I have a 2001 3.8 L mustang, it sat for about a year tried to start fuel pump out, ran great previously. Replaced fuel pump motor only, cleaned tank changed fuel filter and it ran great for about 60 miles. All of a sudden running rough misfires, knocks rough idle. Replaced all plugs, coil pack, EGR and 2 injectors (3-4)which showed misfire on diagnostic. First start idles great feels smooth after 15 minutes same conditions occur, sooner when driving. What should I test the fuel pressure again? 2 Answers

Car sat for a year had to replace fuel pump and filter ran great as it did previously. After 60 miles started to idle very rough, misfire, knocks bogs down when giving gas had to feather gas pedal t...