Austin-Healey 3000 Questions Any type
Is There A Better Set Of Carbs For My Healey?
Is there a better set of carberators I could put on my car other than the stock twin SU ones?
Does Anyone Know Of An Experienced Austin Healey Mechanic In The Greenwich,...
I recently acquired an Austin-Healey 3000 Mki and looking for someone to help me keep it in shape and running. Ideally, want someone with prior experience of working on this (or similar) cars.
What Could Cause Three Clutches To Fail In Driving Period Of 500 Miles?
I have an Austin Healey 3000 kit car. The car has not been driven at excess speed, and primarily on local highways.
Will 1963 Doors Fit A 1962 Body
I have a 1962 bt7. Mine does not have roll up windows, I understand the 1963's do have roll up windows. Does anyone know if '63 doors will fit a' 62 exactly? Thanks, Gary
1966 3000 Clutch Slipping
I have a 1966 Austin Healey 3000 which had a new clutch installed 10k ago. The car has been sitting for a while. We have new brake system, fluids etc. The clutch started slipping. What should I do? Th...
Austin Healey Feels Like Its Running On 3 Cylinders
I have restored my BJ7, MK11, 3000 over the last 7 years. I have one problem, the car since I brought it out, It will run fine for 30 to 40 miles and then feel like its running on 3 cylinders. I have...
1966 Austin Healey 3000 Clutch Bleeding Issues
I recently inherited my dads car. I was having issues getting the car into gear. I would be able to drive for awhile and then slowly come to a stop sign and then putting it into first would cause ...
Can You Tell Me If This Is A 1962 3000
We found a casting number on the side of the block: AEC 881 We also found a tag on the left side of the engine: 29E/50-H2410 Also, a stamping on the rear end pumpkin: MCWCG. Not to sure about th...
1960 Austin Healey 3000
A new front headlamp was installed and it works on low beam but goes out completely on high beam. Any suggestions or remedies? Thanks. DanL
How Much Do Fiberglass Fenders Hurt The Value?
I'm looking into purchasing a 1963 3000 mkII,the steel fenders were replaced with fiberglass..all 4. They look great,the only way I could tell was there was no seam under the headlights.The car will b...
BJ8 Quits Running
67 BJ8 that suddenly quits running after fill-up. Replaced most electrical and boiled gas tank. After a few hours, starts again. Any suggestions?
Duel Master Cylinder
I want to pull out the old single master cylinder and replace it with a duel unit. Who sells a compatible unit?
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.