Ford Bantam Questions Maintenance & Repair
Need Cylinder Head Gasket Torque Specs. Ford Bantam 1.3 Rocam 2006
need cylinder head gasket torque specs. Ford bantam rocam, 1.3, 2006 model. Stood a while, and oil looks like mud, not starting. Want to change cyl head gasket.
My Car Can't Start, What Might Be The Problem?
I have 1.3 ford banram Rocam, I drive for as long as I can but immediately I park it, it does not crank or start at all and the petrol and water gauges all Rose perfectly but the engine is quite, ...
For Bantam 1.3 2004 Not Starting
Hi all I have a 2004 Ford Bantam 1.3 rocam that is not starting the lights on the dash come on but the fuel pump does not turn on and the starter motor doesn't turn over the light next to the clock ...
It Starts But Immediately Shut Off.. It A Ford Bantam Rocam 1.3
They did a major service on my car but now it doesn't want to idle, it swings, start and then immediately shut off like it ran out of fuel, I have checked the fuel system it fine, checked all the ...
Gearbox - Rocam Fiesta
how do you identify a 1300 gearbox from a 1600 gearbox.
Ford Rocam Sensor
Where is the Ford buntam rocam oxygen sensor located
Ford Bantam
Hi everyone i have a 1993 model ford bantam the engin cranks but wont start can some please help me i really want to fix this problem dont know where the fuel cut off switch is located or how it l...
Electrical Issues
Car fan, a/c, electric windows, indicators, speedometer, rev counter, fuel gauge and temporary gauge not working. They were intermittent yesterday but today they just don't work at all so I suspect...
Torque Settings
What are the main bearing and bid end torque settings?
Ford Bantam
I am battling with a Ford bantam 2011 1300xl. Above the back axel there's a pump or cylinder thing. It is leaking I have a photo is done one could help. To me it looks like a pin is missing
Ford Bantum
am driving ford bantum the driver door does not open from the inside please help
Ford Bantam
Hi. My 2007 Ford bantam is giving me a problem, whenever I accelerate it flashes hazard lights. What could be the problem? Thanks
Bantam Overheating When It Wants To
My fan does not come on after removing the engine coolant temp sensor plug. My bantam also overheats. Some times it does some times it doesnt n when it does the radiator fan isnt running. I have ch...
Over Heating
I have replaced a thermostat on my Rocam 2006 model but it's still over heating, a fan is not automatically start.
Straight Swop
Ive got a 1.3 rocam and i want to swop it with a 1.6 rocam what do i need to do. Will the gearbox need replacing ect...
Starting Problem
2007 Ford Bantam 1.6 rocam, the engin cranks but it takes awhile before it starts. When the engine is running it is running smoothly no problems. When the engin is switched off again it struggels to s...
Petrol Filter
In the Ford Bantam 1.3i, how to fit in a petrol filter?
Petrol Filter
In the Ford Bantam 1.3i, how to fit in a petrol filter?
Paul .Rocam 1.3 Car Starts, Battery Light Dies Not Show On The Dashboat How...
Paul .Rocam 1.3 car starts, battery light dies not show on the dashboard however alternator is not filling up the battery. Lights don,t come on.
Ford Bantam My Battery Light Has Been Going On For A While And Doesn't Want...
Ford bantam My battery light has been going on for a while and doesn't want to switch off, While i am driving. I replaced the alternator but the light is still on. What might the problem be?
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.