Ford Probe Questions Maintenance & Repair
I Followed The Diagrams But I Still Cannot Find The Inertia Switch. Can Any...
I hit a large pothole and my engine just died. Several mechanics said it is probably the inertia switch. Can someone please tell me where to locate the switch?
Can Anyone Tell Me Where The Inertia Switch Is On A Probe GL 1992?
I hit a large pothole really hard with the back passenger tire and my car just died. I have asked a couple of mechanics and they tell me it is probably the inertia switch. I need to locate it.
Bloer Motor
1996 ford probe blower motor went from working to not working in one minete i have put on new blower motor new speed switch new relay and still no power to switch
Clutch Or Transmission?
I was just driving home from work when my clutch went. so I think? After i lost my gears, It felt as if I blew out a tire. alot of vibration. I do hear however Something broken and jingling undern...
Need Help With Clutch
So i changed my clutch all seemend to go well now tho when i push the clutch pedal down there is no resistance an does not come up all the way kinda spongy i have bled the clutch but it didnt help mu...
5 Speed Changeover Information Needed
Have a 93 GT auto, parted a 94 with 5 speed to install in it anything special I need to know first?
Blower Motor Resistor DENSO 077200-8400
Searching for replacement Blower Motor Resistor Suggestions appreciated
Fuel Issue?
My 89 Probe GL won't run. When it was tried there was a popping noise under the hood, and blue smoke came out on the drivers side. It is getting fuel through the filter fine but acts like it is runn...
Swapping Engines
Again the engine is gone, electronic distributor continues to fail. Any ideas on swapping the engine. Either rebuilt the existin vs. buying a used one from auto part supplier, thanks.
Not Getting Power To A/C Compressor.checked All Components
My mechanic checked all the power components they good but we still not getting power to the A/C compressor. please help
A/c Clutch.
I have a 94 probe gt the a/c clutch is going is it possible to replace the clutch only or should i replace the the whole unit.
Gt 6 Cyclinder Running On 4
The car is running on 4 cyclinders not 6 so what should I start with I put on new plugs and wires, That didnt work....any thoughts
Stuck CV Axel
I am currently working on replacing my driver side CV axel and have come to a road block. I have the control arm free of everything and the nut removed from the end. After smacking the end of the ax...
1994 Ford Probe 2.0 MT Will Turn Over But Will Not Start??
Driving on interstate car just shuts down. Repaired timing belt, distibutor, head, reset timing, spark plugs, still nothing. Tried a new computer. No Luck. Any suggestions
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.