Triumph TR3 Questions Any type
How To Fix A Leaking Fuel Pump Inlet Fitting
The fuel pump probably has Whitworth threads on the inlet. The compression fitting is standard. Fuel slowly seeps out from the fitting. Is there any source for Whitworth threaded compression fitt...
I Have A 1960 TR 3. Its Running Temperature Is 180 Or Slightly Higher. In T...
I have a 1960 TR 3. ITs running temperature is 180 or slightly higher. In traffic it begins to head toward 230. What is the normal running temperature for this model and age. I just had the radiator...
We Have A Chattering Noise At The Front Of The Engine
We have done the tappets & new bearings in the dynamo...& removed the water pump which does run smooth ....SO could it be the timming chain hope you can help thanks
My TR3 Vin # Is 75710 L. What Month In 1960 Was It Built.
I own a LHD TR3 , and would like to know when it was built, plus what are the differences between a J type overdrive and a A type overdrive , which is the better unit,
Why Will My 1957 TR 3 NOT Rev Past 3500 RPM Without Cutting Out?
I have done a complete tune-up with new points, condenser, plugs, wires. I rebuilt fuel pump and cleaned and adjusted the SU carbs. Timing has been set. Vehicle starts and runs fine up to 3500 RP...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.