99mustang3.8liter were are the fuses for the wipers

99mustang3.8liter were are the fuses for the wipers 1 Answer

I'm trying to fix the heater in my 1966 Ford Mustang, and I read in an answer on here concerning the switches for the heater "Also all 3 of those control levers are hooked to cables. Look under the dash and check to make sure those cables are connected and not broken. Sometimes they stiffen up and break." If one of these (the one reading "heat") were broken, would it stop the heater from starting even though all the other parts are working? And if so, what solution is there to reaffix the switch to its respective cable? 1 Answer

Attempting to fix a 1966 Ford Mustang's heater. One of the switches inside of the car is disconnected from its cable, which has broken. What's the fix?

where can i get a cowl .for 1998 ford mustang.it gooes on at front windshield,where wipers are at. 1 Answer

if im not mistaken,its called a cowl!its a black plastic cover looking thing that goes on at front windshield where wipers are at.and where the windshield water dispencer is at .mine is broken and loo...

Windshield wipers stoped working on my 2004 Mustang, replaced the motor and now have only 2 speeds and the wipers stop in the position their in when you turn off the switch. WHY? 4 Answers

During a rain storm while driving home from work the wipers just stopped working. Everything had worked fine up untile that point, multi-speeds, washer, turn off switch and blades return to bottom pos...

are the engines on a 2004 the same as the 2004 Crown Victoria 4 Answers

I am curious to know if the 2004 Mustang GT's and the 2004 Crown Vic's share the same basic engine block and mounting arrangement to the front crossmember? Thanks, Cody