Did you overtighten the lug nuts? They should be torqued to the proper spec usually listed in the owner's manual. This torque value probably is between 80 to 100 ft lbs. Lug nuts should be installed dry with no lubricant or anti-seize and torqued to spec with a hand torque wrench. Getting them too tight can warp the brake rotors requiring them to be replaced.
Car body and steering wheel begins to shake during braking. Stops like it has oval wheels in a sense. Recently replaced front brakes
2012 Mazda MAZDA2
-
Maintenance & Repair
Slight squeak/chirp starting while idling. I assume it's one of the belts...? Could it just be pulley tension? Also, I appreciate everyone's help on here. I have been having trouble responding to...
2012 Mazda MAZDA2
-
Maintenance & Repair
I have a 2012 Mazda 2, it is stuck at airport parking with a flat battery. I can't open the door with the key button but if I open the door manually will the alarm go off? I need to open the door...
2012 Mazda MAZDA2
-
Maintenance & Repair
My horn is overly used since I get frustrated with drivers and traffic. For several months it sounded like a jalopy horn and yesterday it went from one sound to no sound. When I press it I hear a cl...
2011 Mazda MAZDA2 Touring
-
Maintenance & Repair
A rattling noise on the driver side of my car in the front here at all speeds especially going over bumps. Maybe swaybar links? Not sure any help would be appreciated.
2011 Mazda MAZDA2 Touring
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.