I replaced the clutch cylinder on a 96 Mitsubishi galant. Now the gears are hard to shift.
Asked by Biggdogg72 Sep 01, 2013 at 08:27 PM about the 1996 Mitsubishi Galant
Question type: Maintenance & Repair
21 Answers
Did you bleed it completely? Is shaft fully extending out of cylinder?
migration_judge_roy answered 11 years ago
the slave cylinder has still got air in that...have a heavy foot help you and pump up and up and release the bleeder (safely in aquarium tubing into an old soda bottle) Get a heavy helper with heavy feet who isn't afraid to work with you repeatedly....'bout three or nearly a bottle full of fresh brake fluid...will chase all the air bubbles out and restore full stroke to the cylinder~
migration_judge_roy answered 11 years ago
H25 started wearing his hat....had to put mine up again...you had yours up and down and down now....sadness...
migration_judge_roy answered 11 years ago
there are only "the dirty dozen"....you're one of them~
migration_judge_roy answered 11 years ago
7Jimmy7 with his barnyard solutions gets me with some common sense advise...the guy cannot use vocabulary very well, but knows about cars...He has a hat too, but just brags to his family about it....maybe we will get to see this "wizard" one can only imagine at this point~
migration_judge_roy answered 11 years ago
Daniel is pissed that I never asked him...with a negative comment....well duh~
migration_judge_roy answered 11 years ago
cool except you're lookin' in a mirror....GIMP can fix that in a flash....or you could look at the camera in the mirror.....very annoying~
migration_judge_roy answered 11 years ago
or if you're okay with a 'backwards' dandyoun, I'm with you 100%~
migration_judge_roy answered 11 years ago
I'll PM 7Jimmy7 and see if he can get his ass out here~
migration_judge_roy answered 11 years ago
your daughter or son? very inventive....probably wonderin' why the hell are you spending so much time here~
migration_judge_roy answered 11 years ago
I like it! you can read the logo easier~ can hardly read mine big ole' head~
migration_judge_roy answered 11 years ago
I know some of these Chrysler engineered in Poland have NO bleeder...as if...was it too much trouble to drill and tap a fitting? NOW you've gotta take it off and use a small funnel to fill it getting the air to rise to the top...hold your finger over the opening and assemble it....of all the nerve...I'd like to sit on someones desk and feed them popcorn while they are tied to a chair~
Youngest grand daughter. Lol
migration_judge_roy answered 11 years ago
What are they expecting us to do here? Did you see the PTcruiser timing belt u-tube vid...the guy cursing and goin' insane by himself with only RV power spending all night throwin tools...completely insane....tho at the end said that he'd do another~ check it out~
migration_judge_roy answered 11 years ago
She's a good sport and still inerested in life~
Oh that not a good one. Had to turn it off cause grand daughter heard all the cussing. Thanks judge_roy now I in trouble with the wife. Lol
I just pointed the phone at myself and after about 5 tries I got a decent one...emailed it to myself...ok back up it goes...but I'm too wrinkled....
migration_judge_roy answered 11 years ago
...wrinkled is good, you ole' Texan....that's what an old Texan is supposed to look like...shows character and experience of life H25...you ain't goin' to Hollywood for a facelift...why would you do this? it isn't a popularity contest...there was a beautiful girl around here who had her face shot off with a shotgun...yet survived....to make us all seek out a paper bag to put over her head~ooooof grugly~