Ford f150 hydraulic clutch
Replaced slave n master
cylinder, but clutch still
won't work
Replaced slave n master cylinder, but clutch still won't work
2007 Ford F-150
-
Maintenance & Repair
I have a 1985 300 6 cylinder F150 and I recently replaced the clutch. After replacing the pressure plate, clutch pad, throwout bearing, and the slave and master cylinders, the clutch still won't disen...
1985 Ford F-150
-
Maintenance & Repair
Foot slipped off the clutch pedal, and the eyelet that connects to the pedal linkage broke. New or rebuilt master cylinder and I can't get any resistance from the pedal.
1994 Ford F-150 XL 4WD SB
-
Maintenance & Repair
2000 Ford F150 2wd, manual trans, grinds and hard to put into reverse, once you start going, gears easily shift, however when going to stop, and clutch is depressed, it still tries to pull, like it...
2000 Ford F-150 Work SB
-
Maintenance & Repair
I bought a 1989 Ford F150 6 cylinder, 4wd, 5 speed manual transmission that had been sitting for a year. After fixing a couple things on it (Clutch interlock switch, headlight dimmer switch) I started...
1989 Ford F-150 S Standard Cab 4WD LB
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.