i have no power at my plug in on my ob2 and the fuse is fine,what else could be wrong
I pluged in an analyzer to my ob2 under the dash and there is no power at my plug in,the fuse is good what else could be wrong
Asked by jeffrey1959 May 06, 2017 at 08:10 PM about the 2006 Chevrolet Silverado 1500
Question type: Maintenance & Repair
I pluged in an analyzer to my ob2 under the dash and there is no power at my plug in,the fuse is good what else could be wrong
I pluged in an analyzer to my ob2 under the dash and there is no power at my plug in,the fuse is good what else could be wrong
2006 Chevrolet Silverado 1500
-
Maintenance & Repair
I plug in an analyzer and I have no power to my ob2 plug in under the dash
2006 Chevrolet Silverado 1500 LB RWD
-
Maintenance & Repair
I have a 2005 chevy silverado 1500 LS and the tachometer is reading high. It is very erratic. It reads anywhere from 1000 RPM high up to pegged high. However high it is when I turn off the engine, is ...
2005 Chevrolet Silverado 1500 LS Extended Cab RWD
-
Maintenance & Repair
I replace the brake calipers and the master cylinder on my 2005 Chevy Silverado 1500 5.3 liter and still cannot get brake pedal back I've bled the system there's times what else could it be
2005 Chevrolet Silverado 1500 Extended Cab RWD
-
Maintenance & Repair
Oil level is fine
2006 Chevrolet Silverado 1500 1LT Crew Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.