I have a1981 f-250 gvw class H, 8501--9000 LBS. leaf spring, srung-over design. What is best way to get 3'' of lift and have good articulation,and still pull a trailer or put a camper on .

I have a1981 f-250 gvw class H, 8501--9000 LBS. leaf spring, srung-over design. What is best way to get 3'' of lift and have good articulation,and still pull a trailer or put a camper on . 1 Answer

i have a 92 f 250 that has a 460 that runs mostly on propane but sometimes on gas. is it possible for me to instal a super chip or hyperteck programmer? 3 Answers

engine has 335000 kilometers on it but runs excellent . it has a new tranny with shift kit so i not worried about that. any input would be great

I have a 89 Ford F250 7.3 idi with an aftermarket turbo and a c6 3 speed automatic, can i take the transfer case and front four wheel drive axle from a 76 For F250 High Boy and put it on my 89? 4 Answers

I will probably need a new front drive shaft be cause my truck may be longer. But will the suspension be compatible on my frame?

97 F-250 HD 1 Answer

I have a 97 ford f-250 that got hit on the driver side door, transmission and engine are great but frame and cab are done. Is there a way to pull the engine and transmission and install it into a 98...

What type of gear was used in a 1990 f250 3/4 ton with a 4.9 engine? 1 Answer

I recently bought a 1990 f-250 with a 4.9 liter engine. 300 6 cylinder. It is geared really low. (too low) I am running about 3200 rpm at 65 mph and would at least like to get to 65 at 2200 to 2500. T...