blead all brakes good fluid still no pedal. rwal? if so how can i fix without replace. or is it something else?

What is rwal? So, you had no pedal to start with? I'm trying to understand how you got to this point. Usually, no pedal means a leak (internal or external) If there's air in the system, you should be able to pump the pedal 5 or 6 times and feel pressure but it goes away if you let off of the pedal for a second or two and press again. A blown seal inside the Master Cylinder will cause a low or slowly dropping to the floor pedal too. More info about why and how you got to this point - we'll see what we can come up with

Replaced master and its gettin better but still like u described. pumps up after 3 or so but after a sec its goes down. everything works and it will stop but i cant find the air. Driver side caliper bleader is broken so blead at banjo fittin. Everything else is new accept booster. never had issues like this before n have done hundreds of brake jobs. this is a new one for me

went I push on the pedal break it make a noise and almost no break