carburetor

I would just say "no"

It's possible but you need to be serious about leaning it can be done for about $800 second hand (salvage yard) parts are the way! Initially a normally aspirated carburetor, in 1988 the 318 gained throttle-body fuel injection with the 360 following in 1989. Power output for the TBI 318 was 230 hp (172 kW; 233 PS) and 280 lb·ft (380 N·m) of torque. The TBI 360 had 240 hp (179 kW; 243 PS) and 283 to 295 lb·ft (400 N·m). In 1992 the multiport fuel injected Magnum 318 was the standard engine while the LA 360 with TBI was still offered NOT TO HARD TO DO, BUT ONLY DO THIS IF YOU WANT TO LEARN AND AS A FUN PROJECT. AFTER THIS MOVE ON TO MORE COSTLY GEAR...CHECK OUT MOTEC CONTROLS MY PREFERRED.