05 equinox check engine light on.
Asked by Mike Sep 14, 2010 at 11:42 PM about the 2005 Chevrolet Equinox
Question type: Maintenance & Repair
it pops up two codes. the one im worried about is U0107 "lost communication throttle".
if you have had this problem let me know what to do please. live in TX and inspections wont pass it because of this. please dont say to reset codes or unhook bat. all these mask the issue to the eye not the computer failing it. thank you
4 Answers
sickmyduck714 answered 13 years ago
clean the air throttle body with carb cleaner, make sure the flap opens and closes ok. Also, clean the inside of the MAF sensor with MAF cleaner.
sickmyduck714 answered 13 years ago
clean the air throttle body with carb cleaner, make sure the flap opens and closes ok. Also, clean the inside of the MAF sensor with MAF cleaner.
u should run an equinox scanner and find out the correct error. http://chevroletequinox.org/
I have a 2010 Chevrolet Equinox LUTZ and I'm experiencing the check engine light on and a message of engine losing power and my stabilitrack light coming on took it to the Chevy dearleship to be diagnosed and found out it's my neither of my Throttle Position Sensors are working so the whole Throttle Body Unit needs to be replaced,the right front wheel bearing, and right front wheel speed sensor all are connected to this problem hope this helps !!! Good luck!!!