i drove with my e brake on now the brakes feel spongy what did i most likely do?

i drove with my e brake on now the brakes feel spongy what did i most likely do? 1 Answer

After doing a brake job and hooking up the brake sensor wire my dash brake light remains on. How do I get this light out there is nothing wrong with my brakes? 1 Answer

I had to disconnect the brake sensor wire while changing a wheel bearing and front brakes on my GMC 07 Truck. I used a C clamp to push in the caliper now after connecting brake sensor wire I now have...

I use about 2 to 4 oz. Of brake fluid after a few weeks I have to do the same. I have 80000 on my and it's been mine since new. I have no leaks at any wheel or master cylinder so we're does all e 1 Answer

Brake fluid use.

E- BRAKE LIGHT ON 2 Answers

One of my brake lines broke so we replaced it and added fluid back into it(full master cylinder). Had no problems with the brakes after. The next morning, while driving it I notice the the ebrake l...

How do i replace the ignition lock cylinder on a 1988 gmc sierra c1500 350 v8 with tilt steering. 1 Answer

Today i went to start the truck and something in the ignition popped and now when you turn the key nothing happens it moves through the positions but then it doesnt do anything. How hard is it to re...