How do I replace freeze plugs.but not remove the engine

How do I replace freeze plugs.but not remove the engine 3 Answers

Fuel injectors not spraying. How do I check them? 4 Answers

Was running just fine. Stop shut it off went in store and when I came out it started then died when put in to gear. Now I have fuel going to injectors, but not spraying. I have TBI on 5.7l motor.

How do I fix this one?! 2 Answers

I have a 1982 GMC Sierra Classic Suburban. I replaced all the bulbs but if I have my headlights on left signal won't work and indicator is solid not blinking. When headlights are off the left signa...

Should the tac go up when engine is cranking but not started? I just barely nuges. I was told this could indicate wheather the crank positioning sensor is working> 1 Answer

Engine will run ok for a while and will then stall, surge and stall. Then will not start. may not start, not consistant have new fuel pump, fuel filter and fuel relay which made no change. There is ...

I replace the pitman arm 90 degrees off from original position. Can I remove the steering wheel and reattached 90 degrees off to realign? 1 Answer

I replace the pitman arm 90 degrees off from original position. Can I remove the steering wheel and reattached 90 degrees off to realign? Does the steering wheel have this 4-position option like the p...