I have a ford bantam 2004 rocam 1.3 recently my fuel pump gave in so I had the pump replaced the problem is that my vehicle starts and idles but does not want to rev up i have been to a dealer and they said mayb there is not enough fuel pressure as it is controled by the pcm which mayb needs to b recoded if so is there any recommendations of people in cape town that does these things besides dealers are a rip off.

I have a ford bantam 2004 rocam 1.3 recently my fuel pump gave in so I had the pump replaced the problem is that my vehicle starts and idles but does not want to rev up i have been to a dealer and they said mayb there is not enough fuel pressure as it is controled by the pcm which mayb needs to b recoded if so is there any recommendations of people in cape town that does these things besides dealers are a rip off. 1 Answer

I drive my ford bantam 1.3 and it was raining a lot and come and park it as usual.when the following morning I try to start it and it only turn the engine but it is not starting 13 Answers

I drive my ford bantam 1.3 and it was raining a lot and the following morning it jst cranking bt cnt start

Help please, my ford bantam heater just starts while using the ac. The aircon is pouring water in to the car on the pasanger side underneath the dashboard!. And if n switch off the car it starts overheating! So I think that the cooling fan is also not working right! What can the problem be? 9 Answers

The ac only drips water when its on though!

Do i need to replace the oil pump on my bantam 3 Answers

Ford Bantam 1.3 Rocam 2008, 170 000kms: I had a temporary drop in oil pressure followed by quite loud ticking coming from the cylinder head (I stopped the car immediately). I gave the car a little r...

i have a 2006 ford bantam rocam the engine has been done but when i start it it does not ref up it does not have a knock sensor and no wiring for that either 1 Answer

i have a 2006 ford bantam rocam the engine has been done but when i start it it does not ref up it does not have a knock sensor and no wiring for that either