I am putting a new wiring harness in a 1963 corvette. I can not determine which wires go on the balast resistor.

I am putting a new wiring harness in a 1963 corvette. I can not determine which wires go on the balast resistor. 1 Answer

After putting a new battery on my 1987 Corvette I have no power to anything including the ignition. 4 Answers

I thought my battery was dead because I had no power at all. I put my battery charger on the battery. It showed fault. I thought the battery was bad. I put a new battery on and still no power to a...

yes my lock is triped in the lock position on the 75 corvette new lock mechanism and the door panel is still atached so how do i get the door to open i have access the the two metal roday that i can pull on with a screw drriver is there another latch some were that im missing what are my opttions here 1 Answer

i have new lock and new latch that was installed on a 75 corvette when i put the pannel on i closed the door and now the door will not open so what are my options to get the door opened thank you mr...

Hey all. I have a 1975 Corvette C3. I just did something stupid. I pulled my alternator to have it checked; however I did not disconnect the battery. As I disconnected the battery cable from alternator, it arc'ed badly. After having the alternator checked, upon reinstalling it, I have no power at all. I'm trying to determine which fuse, or relay, or whatever I have blown. Any help is appreciated. I do not have a fuse box layout. Thanks Apostle Smith 2 Answers

As stated in the subject question, but again, I have a 1975 Corvette C3. I ust did something stupid. I pulled my alternator to have it checked; however, I failed to disconnect the battery first, ...

I own a 1985 Corvette Coupe. I locked the keys in the car. How can I open the car? 1 Answer

There must be an easy way, I hope? Bruce