Wiring
My 2000 Chevy Silverado was having
misfires on cylinders 1,3,5,7 so I checked the
voltage to each coil pack and found each
one reduced voltage starting with cylinder 7
being the highest with 10.8 volts and with
cylinder 1 being the lowest with 2.7 volts. So
I found a 12 volt wire on the wire harness
that was only hot with key on and ran a an
overlay wire to 1,3,5,7 so that they would
remain 12 volts constantly with key on. After
doing so the engine ran great. The question
is by bypassing computer and fuse box
could it cause damage to the engine or any
of the sensors by doing this?