I did a motor swap in my 2000 Chevy silveradio and the motor seems to backfiring at idle. I replaced and cleaned the MAF. What could be causing the little backfires? does the computer have to reset?

I did a motor swap in my 2000 Chevy silveradio and the motor seems to backfiring at idle. I replaced and cleaned the MAF. What could be causing the little backfires? does the computer have to reset? 2 Answers

if i change just the brakes pds in a chevy 05' 1500 siverado, do i vave to reset de computer ? 4 Answers

the engine doesn't star after replaced just the brake pads and the check engine light appear at the dash board !!! Do I have to reset the computer ??

What do I have to turn the key and hit the altinater to start my 2000 chevy 1500 with 5.3 1 Answer

Dash lights up new starter new altinater and new battery this doesn't happen all the time but when it does o have to hit the altinater and turn the key at the same time. Everyone I ask this questio...

i have no power at my plug in on my ob2 and the fuse is fine,what else could be wrong 2 Answers

I pluged in an analyzer to my ob2 under the dash and there is no power at my plug in,the fuse is good what else could be wrong

I have a Chevy pick ! Well I went to pull the oil stick and the oil look a little cloudy the truck does not smoke Got a can of Blue Devil head gasket sealer should I change the oil and put it in with the new oil? Sure would appreciate your help Bonnie 2 Answers

Do you change the oil and put the Blue Devil in!