water pump on a PT Cruiser what is the trick to getting that huge metal bracket out,,or in my case now back in

205

Asked by Chip Jan 17, 2015 at 05:38 PM about the 2003 Chrysler PT Cruiser Wagon FWD

Question type: Maintenance & Repair

when the guy working with me finally got it
out he had no idea how it came out. S
I'm guessing you can't get there from here
you have to go somewhere else and start.
thank you in advance.

ce

13,735

Moparjohn answered 9 years ago

you have to take and jack the engine up pretty high to get it in and you have to kinda twist it in ...also you have to the lower bolt in it as well ...you wont be able to put it in after the fact

Mark helpful

Your Answer:

water pump on a PT Cruiser what is the trick to getting that huge metal bracket out,,or in my case now back in 1 Answer

when the guy working with me finally got it out he had no idea how it came out. S I'm guessing you can't get there from here you have to go somewhere else and start. thank you in advance. ce

2003 Chrysler PT Cruiser Wagon FWD

-

Maintenance & Repair
My pt cruiser is getting hot what to do 1 Answer

I have a 2003 pt cruiser it was getting hot first thing I did was replace thermostat, then radiator, cap, and last the fan after I replaced the fan it is leaking coolant out on the ground as soon as...

2003 Chrysler PT Cruiser Limited Wagon FWD

-

Maintenance & Repair
wanting to find out where the access to the fuel pump is on the 2002 touring edition pt. cruiser. trunk, back seat, or not at all. 13 Answers

cruiser cranks and cranks but it does not turn over and start. I do not smell fuel at all during this process. could it be anything but the fuel pump. Also, could a diagnostic test tell me the answer?

2002 Chrysler PT Cruiser Touring Wagon FWD

-

Maintenance & Repair
why is my pt cruiser overheating.water bubbling and shooting all the water back to the resorvor and dump it out in the over. 26 Answers

I have a 02 pt cruiser change waterpump.thermostat radiator.hoses heater hoses clean heater coil.now heater works.didnt work before.bleed air out system.still overheats.water bubbles to radiator cap...

2002 Chrysler PT Cruiser Limited Wagon FWD

-

Maintenance & Repair
whats the chances that a pt cruiser will run good after timing belt went off. checked the heads and pistons and there is no damage? will it be ok after installing new timing belt and water pump. 4 Answers

so not so long ago, my timing belt on my 2001 pt cruiser went out. luckily my wife wasnt going fast maybe speed limit under 25mph.car didnt want to start so my mechanic told me it was the timing b...

2001 Chrysler PT Cruiser Limited Wagon FWD

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.