Why does my pt cruiser shake while in drive and why doesn't the compressor turn on
2 Answers
firebird338 answered 8 years ago
The shaking maybe that it needs a tuneup and the compressor not coming on low or no refrigerant in the cooling system.
firebird338 answered 8 years ago
The shaking maybe that it needs a tuneup and the compressor not coming on low or no refrigerant in the cooling system.
I have change motor oil ,transmission also flushed radiator replaced all four motor mounts and also the camahafts
2004 Chrysler PT Cruiser Touring Wagon FWD
-
Maintenance & Repair
My cruiser was having a problem over heating at times and it had a little leak, I think off the but truly im not sure. It started blowing cold air while the heater was on. Finally before it died on m...
2002 Chrysler PT Cruiser Touring Wagon FWD
-
Maintenance & Repair
And when it does that the oil light comes on when I get ready to stop.
2005 Chrysler PT Cruiser Wagon FWD
-
Maintenance & Repair
Tried to check for error codes on 2006 PT cruiser that im buying but nothing registers when I plug in the cable/module for CarMD, similar to what MVA/DMV reads for inspection. When I put it on any ot...
Chrysler PT Cruiser
-
Maintenance & Repair
I have a 2004 PT Cruiser. I can turn it on and it has full power but when I go to start it nothing happens. The gauges move but there is no click or turn over. I think it is the starter but my dad t...
2004 Chrysler PT Cruiser Wagon FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.