Put a little dialectic grease on the shaft, and push it down into place. The shaft must be rusted up pretty good. It only goes on one way.
Hornet_2497 answered 7 years ago
Might have to rotate it until the flat spots line up and it should drop right in.
My rotor won't go on distrebiture
1992 GMC Sierra 1500 C1500 Extended Cab LB
-
Maintenance & Repair
changed cap rotor and plugs ,will no longer run right ,must have wired wrong, need wiring diagram
GMC Sierra 1500
-
Maintenance & Repair
After all parts were replaced I disconnected both battery cables and touched them together per a mechanics suggestion to "clear the computer ". Would a dirty egr cause this? Please help.
1997 GMC Sierra 1500 K1500 SL 4WD Extended Cab SB
-
Maintenance & Repair
Replaced fuel filter, replaced distributer cap, replaced rotor. Ran like a top. Drove it to work this morning. Passed another vehicle and Yukon died and now won't start
1994 GMC Sierra 1500 K1500 Special 4WD Standard Cab LB
-
Maintenance & Repair
Have to constantly bump start it when shifting down. Thank god it's a standard. Have changed plugs,wires, cap and rotor. Tried running high test gas and have tried injector cleaner.
1995 GMC Sierra 1500 C1500 SL Standard Cab SB
-
Maintenance & Repair
CarGurus has 6,519 nationwide Sierra 1500 listings starting at $3,975.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.