Ac compressor relay
Just replaced my whole ac system on my jeep
grand 5.9 L. My new ac compressor came with the
wrong plug so I had to cut and splice in my old
plug to make it work. I hooked up gator clips to a
battery and the compressor was engaging and
disengageing just like it should. I got to test my
clutch once I got everything put back in from the
relay panel and I got nothing? Any suggestions?
I'm at a loss. Is it possible I aired my clutch
backwards? Ground to power and power to
ground? But I figured if I did that then the test run
with the gators wouldn't have worked right? Any
advice is greatly appreciated. Thank you.