why wont my fan come on
Asked by samonedeann Jan 03, 2014 at 11:29 PM about the 2000 Mercury Grand Marquis LS
Question type: Maintenance & Repair
i replaced my ac blower resistor and my fan still will not come on so my heat and ac can
work
7 Answers
Check the fuse. There may also be a relay for the blower.
Yes on both Tony - If the blower motor was also replaced then it's possible that the speed selector switch is burned (not uncommon). The resistor will only keep the fan from blowing on speeds other than High Speed. Often, the fan gets old, the resistor pack blows it's protective fuse, the driver uses the only speed left - high speed - and the worn out motor draws a lot of amperage through the switch and burns it out.
might wanna take jumper wire to test the fan after checking fuses and relays...
samonedeann answered 10 years ago
what could be the problem if when i straight wired it my fan came on
sounds like relay or maybe your heat temp sensor?
my fan motor wont come on if i ground it it will dont know weres the relay but all the fuses are good 1991 marquis anyone can help
98 grand marquis fan come on when I turn my ac on what I need to do