I have a 2002 pontiac grand am the lugnuts are getting extreamly hot breaks seem to be locked up I have replaced rotors pads calipers and break hoses and master break cylinder still having same proble

I have a 2002 pontiac grand am the lugnuts are getting extreamly hot breaks seem to be locked up I have replaced rotors pads calipers and break hoses and master break cylinder still having same proble 1 Answer

just replaced pads,turned rotors and replaced calipers on my 2004 grand am. now front rims and rotors are getting so hot you can't touch them. what might the problem be? 3 Answers

after replacing pads,calipers and turning rotors,i get a slight squeal at 35mph and rims and rotors get to hot to touch. what might be the cause and the fix.

I have a 2002 Grand Am and the brakes are locking up on the front replace calipers and the rotors and the master cylinder What could be the problem 2 Answers

I have a pontiac grand am 2005 and had the ignition replaced. It started for a while then it quit starting. It wont even turn over. The battery and alternator are good. What can it be. 1 Answer

I had the ignition replaced and the sensor monitor checked out fine. The battery and alternator are good. The car wont even turn over when I try to start it.. Got a jump and it didn't work.

I have a 2001 Grand Am 120k miles idles rough and stalls. Error P0108 so replaced map sensor and hose, still hase same problem. 2 Answers

Other live data from the computer analyzer FUELSYS1 OL_FAULT. map IN Hg 25.4. RPM 956. Sparkadv -3 degrees, IAT 66F. have a 2001 Grand Am 120k miles idles rough and stalls. Error P0108 so replac...