yes, will need to use astring and measure the belt routing same as factory minus the compressor but make sure you dont have the belt touching at any point, once mesaured with a string get the length of it and take the measurement to napa autozone ect. to get a belt, they can check sizes.
Can you on a 3.1 if the water pump has a smooth pully
can i remove the ac and bypass the compresor
2002 Pontiac Grand Prix SE
-
Maintenance & Repair
I have a 2004 Pontiac Grand Prix the ignition switch has been giving me trouble tle key turns but won't crank and the the theft system disabled light is on is there any way to bypass it
2004 Pontiac Grand Prix GTP
-
Maintenance & Repair
Can you use a shorter belt and different routing to bypass a frozen AC compressor on a 97 3800 Series 2 supercharged?
1997 Pontiac Grand Prix 2 Dr GTP Supercharged Coupe
-
Maintenance & Repair
my 2007 Pontiac grand prix ac compressor kicks off an on when I am driving and in park I change out the relay and its still doing the same thing what is the problem?
2007 Pontiac Grand Prix Base
-
Maintenance & Repair
My a/c compressor pully froze up on my 2003 pontiac grand prix ordered New part was told I had to pull the whole motor do I have to ?? Or can I get a smaller belt and bypass my a/c
2003 Pontiac Grand Prix GTP
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.