truck misfires on all cylinders. air cleaner removed and it quits running

truck misfires on all cylinders. air cleaner removed and it quits running 1 Answer

Ring that that the air cleaner sits on 3 Answers

I am buying this truck and it needs some love. There is a ring that goes around the tbi that the stock air cleaner is supposed to sit on, what is that ring called and do you know where I can get o...

hello i have a 91 s10 with the 4.3 v6 the truck ran great with a broken motor mount on the driver side but after replacing it the truck wont start motor is getting gas fire and air PLEASE HELP 2 Answers

4.3 v6 with 3k+ miles ran great did full tune up still ran great then i replaced the driver side motor mount and it wouldn't start i used a jack to lift the motor to replace the broken mount im gett...

#5 cylinder misfires 1 Answer

I have a 2000 Chevy s10 zr2 extended cab, back in September it started misfiring on #5 cylinder, not all the time but is sporadic, I changed the plugs, wires, cap and rotor, it still misfires, fina...

Was rolling in 5th gear going 60, heard aloud screeching noise and it threw us forward in the seat and slowed it immediately to about 40.I pulled off to the side of the road and smoke was coming from under the truck.I looked around and couldn't see anything visibly wrong.I started it up again just fine and started rolling in 1st gear, then I tried to shift to 2nd the truck just stopped and wouldn't go into any gear.At this point the truck will start but when I let the clutch out, it dies(in neutral). Had to remove my drive shaft to be towed on towrope because it wouldn't roll smooth in neutral. When the engine is running now I don't feel any vibration through the gearshift anymore like how I used to before it broke down. What could it be? 3 Answers

Was rolling in 5th gear going 60, heard aloud screeching noise and it threw us forward in the seat and slowed it immediately to about 40.I pulled off to the side of the road and smoke was coming from...