What model transmission do I have?

first of all standard or automatic?

and if you are looking to replace yours, especially with a used transmission, it would be cheaper and it would make more sense to get yours rebuilt. torqueflite is common, should be cheap

yes the transmission from a 2500 will fit, the 97 1500's and 2500 w/5.9 v8 came with a 46RE which has a lighter duty torque converter, and different bands. the 2500 prolly has a different transfer case though.

47RE's are V10/Cummins I6 specific and will not fit.

My truck is automatic 2 wheel drive. 5.9 liter 360 Gas engine. Im just trying to do a local search for a tranny that will fit my engine. Im told from another source that its a 518. is that the same thing as a 46RE? When Im on ebay looking at trannys from 95 models and 99 models...it will say its not compatible...i believe they are. just not sure exactly which year models are compatible though. This tranny has been rebuilt like three times so I dont want to do it again because it seems there is something else going on. i figured trying a different tranny might be a better idea. Im looking for an A grade used one from a junk yard or individual. Just wasnt sure exactly what i was looking for. seems to be some confusion about compatibility with other year models and the exact type i am asking for.

no a A518 is an old 3 speed non lock up, non OD transmission. the 46RE is an A518 with a lock up torque converter, and overdrive. A518's go on 89-94 trucks, 46RH goes on 94-97 46RE goes on 97-02 trucks.

ok so now the obvious question...which is more proper for my truck? a 46RH or 46RE? since both apply to year 97...and what is the difference between the two? So I am looking for an A518? and thats the same as 46RE? sorry if I seem uneducated here but i havent had the truck very long and I know very little about trannys to begin with

i just re-read your last post...im guessing im looking for an A518/46RE? Is that right?

mine does have overdrive so i gather thats the one

A518's are an old transmission, with a non lock up torque converter, and no over drive, so its 3 speeds and hydraulically controlled. a 46RH is a newer transmission with a lock up torque converter, and over drive, also Hydraulically controlled (note the H in 46 RH) the 46RE is a transmission with a lock up torque converter, and overdrive, it is electronically controlled (note the E in 46RE) both the 46RH and 46RE are improved variations of the A518.

odds are your looking for the 46RE

mine is electronic...i do know that for sure...theres wires going to the drivers side of the tranny and a wiring harness bundled up there with zip ties

yup then you want the 46RE

thanks alot man!

another curious question...will a 46RE out of a jeep with same size engine work on my truck? I found this one on ebay Jeep Grand Cherokee ZJ 5.9L Limited 46RE Automatic Transmission 98

its going to have a different output shaft, because jeeps are 4x4

oh yeah...i will keep trying

I have a 98 dodge ram 1500 5.9L v8 with a rebuilt Transmission that has not been used since it was rebuilt. Truck quit working right after the transmission was rebuilt. Brand new torque converter as well

Are you wanting to sell the whole truck or the transmission? Im not sure what you are saying. Where is it located? Im having trouble finding a transmission here locally. If we can make a deal u can call me at 936-647-8227. Name is Tom

Will a transmission in a 98 dodge ram 1500 5.9 fit in a 2001 dodge ram 1500 5.9

no, I had a 99 Dakota rt and i put a tranny from a 2000 Dakota rt in it and it would just shift into 4th gear at like 10 miles an hour and the trans temp light was flashing codes as soon as you turned the key on. I had a shop convert something with the wiring harness inside the tranny and it worked great. They said dodge changed the electronics in them between 1999 and 2000

did you replace your torque converter during the 3 times ya rebuilt your trans...another problem the dodge trans has if you have never done is the control mod solinoid and pressure sensor..if they go out the trans wont shift and will spin out like the trans is slipping..thats whats wrong with mine...that kit through rockauto.com is 121 total shipped to your door..goodluck

would that jeep 46re work in a 97 ram 1500 4x4 5.9?

Question... how about a 96 Dodge 1500 1/2 ton 4x4 360 gas with overdrive transmission for a 01 Dodge 2500 (3.4) 4x4 360 gas with overdrive?

There is some wrong information above, an A518 most certainly IS a lockup 4 speed overdrive transmission. It came out in 1988 and is based on the 3 speed torqueflight 727. It was renamed the 46RH and then the 46RE as the valve body was converted electric. The lighter duty 4 speed automatic started life being called an A500 came out in 1989 and renamed 40RH, 44RH, 40RE and 44RE. It was based on the torqueflight 929.

96 to a 99 will work

Whats the model number for a 98 318 4x4 tranny

This should help http://www.smartpartsauto.com/dod ge-ram-transmission.html

Will a trans. From 97 dodge Dakota v8 5.2 2 WD automatic truck interchange with my 98 dodge ram 1500 v8 5.2 2 WD automatic trans properly

if the vin numbers are available call the nearest mopar parts dealer and they will look it up for you

I have 98 dodge ram 5.9 v8 automatic 2wd it won't shift out of second until it warm up then it will every time what could it be

will a 94 dodge ram 1500 automatic 4x4 5.2 transmission, fit a 94 dodge ram 2500 4x4 5.2 automatic transmission

I have a 94 ram 1500 5.9 mpi-ldc 4 wheel drive Its used for towing a car trailer and plowing snow as well as a dailey driver.what automatic transmission will be the best and interchange with mine?

98 dodge ram 5.9 v8 automatic 230,000 miles 2wd won't shift out of third until it warm up then it shift fine what can it be does anybody know

Joe92334 you need new governor pressure solenoids its fairly easy to do just take off the transmission pan and remove them . YouTube shows how to replace them

my transmission went out of my 1997 ram 1500 5.9 v8 4x4 i have a 96 dakota 3.9 v6 will it work

Okay another ? I have an 88jeep Cherokee 4x4 I pulled the straight 6 cause I blew it lol.. Keep in mind this is a trail rig rock buggy... I have a 96 dodge ram 1500 5.2 318 magnum 2wd sitting hit two deer that's why its sitting still runs and drives but what I'm trying to get at will that 5.2 bolt right up to the tranny in my jeep and also can I take the tail end of the tranny from my jeep and put it on the tail end of my rams tranny to make it 4x4 compatible.......... Also I'm converting the 5.2 to carburetor so what tranny would I need for all this to work 46rh? If they are both the same.

I have a? Will a 98 Dodge motor fit in a 97 dodge

Does anyone know if a2003 tranny. Will fit in a 2001 both are 1500 trucks

Automatic

Can someone tell me if a 98 jeep grand Cherokee transmission v8 318 work in a dodge ram 1500.. I know the starter will have to be moved to the left side instead of the right

I have a 1993 RAM 250 with a 5.2l magnum and A518 with lockup converter and electronic overdrive. It's a Federal model and has US ARMY ID numbers stenciled on under the license plates. I have towed 20,000 pounds from Houston to Michigan with it. It is a tough transmission and I recommend it. The difference between the two wheels drive and 4 wheel drive transmissions are the tail shafts. Plus the ¾ ton transmission has stronger bands and internal parts. Make sure that the splines on the shafts are the same. When you go to check out the transmission take your transfer case to test fit. If the transmission has a transfer case installed then you will need to test fit your drive shafts to the transfer case.

is it the same transmission for a manual? I'm assuming you're all speaking automatic but I have a 2001 5.2l 1500 v8 and I am needing a new tansmission for it but I'm having a hard time figuring out which one I need.

Please answer! ! I have a 97 dodge 1500 with a,518 automatic. Bought a transylvania off of a 94 but it has electronic shift and mine has hydraulic can the can the electronic be retro fitted to fit my truck????

I'm sorry I got some wrong info on last post. The 94 has hydraulic and my 97 has electronic can we wire the new transmission to work with my engine? If not will the whole engine and tranny from a 94 mount up to my 97?? Thanks in advance

I had a 2000 1500 van with a 5.9 engine and trans which i took out.don't really know the trans size but all parts are original so if anyone need a trans i do have 1

QUESTION.... I have a Dodge pick up motor 5.9 gas 2000 4x4 need a transmission.... does a trans from a 99 Dodge pick up 5.9 4x4 also FITS??????

Will the trans and transfer case from a 99 dakota work in a 01 ram 1500?

What moddle transmission do I have its a 98 dodge ram 1500 with the 5.2 v8. 2wd

I have a 1998 dodge 1500 2wd v6 will a transmission out a 1999 dodge 2wd drive v8 work in my truck

And how can you tell by looking at the trans what it is and what will work I was told several different ones and you couldnt switch them is there a number that tells you on the case somewhere

this isn't the answer to anyone's questions....would a 91 dodge ram t- case bolt up to my 1997 dodge ram 1500 5.9l magnum I'm almost positive it's a 46re, 4 speed auto made by Chrysler

Help, I have a 1998 Dodge Ram 1500 5.9l automatic I put in a 1998 Dodge Ram 2500 tranny. Shaft is larger. Can I change the yoke in the differential to accept larger drive shaft?

I just finished doing my ram 2500 and still do not know if it was a 46re or 47re. You might have a smaller trans. like a 44.

dodge trans have a number on the drivers side above the drain pan. The second? number is the torque load and mine was a 5.

Not an answer to anyone.I have a question that I need answered. 97 ram 1500 5.2 4x4 EC SB. 46RE tranny was pulled and cracked open before I got it. I ended up replacing shift rod. reinstalled. It leaks between transfer case and gear box. There was no gasket between the two. Should there be or is it rear main sealed... The important one. I have no spark and fuel pump doesn't come on. The crank sensor on top of bell housing needs to be replaced has been spliced and plug wires don't match sensor wires. Is that going to keep everything from working like that? Plus I was told that it was difficult to get sensor positioned correctly distance wise against torque converter.

Anyone online here.....?

I have a 96 dodge ram 1500 4x4 5 speed 318 I have a 97 dodge ram 1500 auto manic 4x4 with 318 QUESTION:The yoke on rearend that faste drive shaft to it with the enterchange? Working on it rt now any help would be appericated thanks

I have a 95 dodge ram 1500 4x4 I put 97 parts on it. Front and rear axles, transfer case,

The 97 transmission is a 8 pin 4 speed , the 95 tranny is a 3 pin 3 speed, I can't plug any thing up but I have it bolted in, no problem. Had to get a custom driveshaft in the rear, and I have to manually shift the automatic, 1st then 2nd then drive which is 3rd and can't shift to 4th cause it's not electronically plugged in. So basically it's a manual automatic

I have a 2001 1500 4x4 5.2L and my 46RE just went up. I am replacing my tranny with a remanufactured one but I am wondering if there is a tranny that I can upgrade to that would be more Heavy Duty like a 47RE or the 48RE. Please help guys cause I do a lot of hauling and towing with my truck and I want a strong tranny

Can I put a 99 tranny from a Dodge 1500 5.9in a 98 dodge 1500 (both auto) with out changanging anything

I have a 2002 dodge ram 1500, with a 4.7 l engine im curious how would i go about finding out what type of transmission I have, i'm looking to replace the engine and I was curious to know if a 5.9 v8 engine will connect to the transmission, i'm a newb at this stuff..

David123 and Dustin the tranny for a 5.9L will only bolt up to another 5.9L engine. Bolt patterns are different. Also the trannys must both be either hydraulic or electric shift and are not interchangeable. The wire harness will not match up. And will not shift properly.

David123 to identify your tranny on the drivers side of tranny where the pan pan bolts to tranny, just above the pan on the edge is a long code stamped into side about 25 characters long. It will give you the model of tranny date manufactured vehicle engine and size. Also o. The top part of bell housing there are numbers and letters about 2" 3" tall that will tell you model of tranny.

For all the guys that think they kno what they are talking about 94 and 95 dodge ram has the 46rh tranmission but if you are looking for one for you truck from 97 to 2001 are the same from late 95 to early 97 the wiring is different as of the plugs for the tran well matter of fact most of your wiring is different 94 to 96 there are 2 plugs that hook into your computer from 97 to 2001 there is 1 plug that hooks into your computer the injectors crank sensor coil sensor and the speed sensors are different just do you research and look it up

Neoguard you are wrong about the trans not working from a 5.2 to a 5.9 they are both the same block actually they a pretty much the same motor but the bottom end crank has a longer stroke little bit bigger pistons and cam not sure of the sizes but the blocks are the same same as the top end this only goes for the magnum motors not the la small blocks..

http://www.magnumswap.com/automatic -transmission-details/

Superdodge98 I was led to believe that if put a different tranny in a vehicle other than what was in it before you would have to reset the computer and/or download data that would work with tranny. Is that correct. Because I had a 46RE and replaced it with a tranny that I got from a totaled truck same year and model. Tranny has different numbers on bell than my old one. But figured it would work since same truck as mine (97 dodge ram 1500 4x4 5.2l). Was also told Tran y from 5.9 wouldn't bolt up as well as computer thing. Sorry if I gave wrong info. This my first dodge. Everything else is a ford. Last 5 months has been, well, "fun". Dodge trannys suck (no pun intended).

I have a 96 1500 4x4 318 will the 360 trans work or not

What year is the 360 tran

I'm not sure about the whole computer thing that has never happened to me... and as I stated before 5.2 and 5.9 are the same blocks. Idk who told you different but they are wrong I'm pretty sure that the 6cylinder bell bolt pattern is the same to

Superdodge 98 the 360 transmission is coming out of a 97 or 98 4x4 witch ever will work without modifying it

You are going to have to figure out weather yours in a hydraulic shift or electric shift. 95 and 96 they put hydraulic shift transmission in the ram but late 96 is when they started putting elertic shift trannys

If it helps it has push button od on the dash

Look at your computer dose it have 3 plugs going into it or just 1 big one

The computer has 3 plugs into it

Electric shift so one out of a 97 or 98 will work

So the 360 transmission will work on my 318 witch torque converter do I need to use

You need to use the one out of the 360 yeah it will work if you look at your computer 3 plugs means it's elertic shift 1 big plug means it hydraulic shift

You have been very very helpful thank you

Yup no problem

i have a 1995 dodge dakota 4x4 automatic with the 318 magnum.. i need to replace the transmission. if i read correctly, i can use thr transmission from a 360 magnum, a transmission from a jeep with the 318 engine, and the transmission from a dodge ram with the 318 engine.. right?

Well it all depends weather it's a hydraulic transmission or elertic shift transmission and you have to make sure all the sensor are the same dodge changed their transmission so much in the 90s

ok. ill have to check that out.. im trying to find one but no luck yet... thanks for your help

And timmy good luck on the tranny swap on a dakota it's alot eaiser to take the torsion bars out instead of trying to work around them and you got 2 plates from the front rear that's bolted to the motor and tranny... and what is your transmission doing you might not have to replace it

It has shavings in it. I lost overdrive on my way to town. Then on my way back from town, it stopped pulling. I haven't found a transmission that I can afford yet..

Yeah your going to need a new one. ALOT of ppl think slipping means the tranny is junk and 9 chances out of 10 its just band adjustment

Yeah. It sucks.. I'm about to start a new job and no way to get there now.. thanks for your help

Stander

question i have 1998 318 dodge 4 wheel drive the junk yard sold me a transmission out of a 360 dodge will it work transmission man said the toqert converter out of the 360 wont bolt up to the 318 fly wheel does any one know he said to put the 318 converter in the 360 transmission help anyone

It will work I just put a transmission in my dodge it a 360 and the transmission is out of a 318

(318 to 360 Trans exchange) The reason for torque converter change is that the 360 is an external balanced engine (with a counter weight on the converter) and the 318 is an internal balanced engine. I know this to be true on sixties, seventies, and eighties models, but not sure about any of the newer models.

I have a 1994 dodge ram 318 5.2 2wd. Will a 1996 5.9 360 engine bolt up with my 2wd trans?

I need major help I have lots of questions Evan 1998 Ram 1500 SST truck transmission problems

I have went to pick and pull and pull two Transmissions one out of a V8 Dakota 1 out of a 5 9 V8 Magnum 98 both times I put them in knocking and grinding noises coming from bellhousing crankshaft area anybody tell me what I'm doing wrong thank you

I have a 2001 dodge 1500 v6 regular cab will a transmission from a 1994 v8 extended cab fit in my 01

No it wont 94 were hydraulic shift transmission and yours is electric shift

Rachal are you bolting your torque converter back up

Hey guys I need some help I have a 03 dodge ram the front diff needs to be replaced so I am wondering if a diff from a 96 would fit?

Could someone tell me what could be causing my transmission in my 01 dodge 5.9 4x4 pickup to be throwing itself into diffrent gears if i put it in drive it swtches from drive to first just switching from gear to gear??????? And tell me what i need to do to fix it.....

You have to check and see it used to be that a 360 was an externally balanced engine and a 318 was an internally balanced engine you have to check and see if it is still true but a 360 torque converter will have a big weight on it and a 318 torque converter will not

Make sure that you check and see if the 360 is externally balanced and 318 internally balanced the Transmissions all the same but you have to use your torque converter for 318 torque converter will not work in the old style late early seventies I am not sure about your stuff

Dodge Ram1500short bed regular cab V6 3.9 liter engine well your motor n transmission connect my engine mounts and transmission connect to drive shaft perfect

Automatic transmission

I have a 2002 ram 1500 4x4 4door sport model and the atuomatic trany will slip sometimes going around a corner any thoughts on this going bad or need pressure sencer or new filter & clean out?

I have 99 1500 ram 4×4 360 motor I was jumping a large hill got airborne and when I landed the truck had done a 180 in opposite direction landing me in reverse with the truck in drive I snapped passenger side axle replaced it got everything back together and now I have no reverse gear when I put the truck in reverse it acts like it wants to go back but then it starts going fwd like putting the brake on while in drive the truck seems like the drive gear starts to pull against the reverse gear please help me out if anyone can and tell me what it could be and also will a 94 Dodge ram 1500 4×4 tranny be compatible with my 99 ram 4×4 will the parts interchange

I bought a 02 Dodge ram 1500 with a 5.9l gas engine that has transmission problems. I changed the filter and the fluid and if shifted to 3rd one time then it wouldn't shift out of 1st gear. Should I buy another transmission or will replacing the solenoids work. The truck also slipped out of 2nd gear into 1st gear. Will a transmission from a 01 dodge 5.2l 2wd fit an 02 dodge with a 5.9l gas 2wd. The 02 has a 46RE transmission in it.

I have 1986 dodge ram van B250 5.9 transmission is no good can hook up any transmission from another year, make or model van or car

i have a 2002 5.9 3rd gen tranny just went i was told i could use one from a 318 long as i change the torque converter , is this right , or do i need a 2000-2003 5,9 trans ???

I have a 1997 Dodge Ram 1500 4x4 with the 5.2 will a 1994 Dodge Drango 4x4 transmission bolt up?

I have a 2001 dodge ram 1500 2wd with a 3.9 v6 what transmission can i use and what years are compatible?

I have a 1995 Dodge Ram 1500 4x4 360 gas engine will the transmission out of a 98 Dodge Ram 1500 4x4 with a 360 work in mine

I have a 1996 Dodge Ram 2500 8.0 L 488 is the trans 46re or 46rh how can i know

I have a 1990 dodge conversion van 318.It had a 904 A tranny, will an A518 tranny work? someone help me!!!!

Can you take a transmission from a 1996 Dodge Ram 2500 with a gas motor and put it into a 2000 Dodge Ram 2500 with a Cummins

does anybody have a 3.9 rear end for a 1998 dodge ram 1500 sport 4x4 I need one for my school truck

I have a 94 Dodge Ram half ton 4 wheel drive transmission why does the transmission fluid pump out why you going down the road

I'm trying to find out if aa 2002 Dodge ram 1500 4.7 transmission will fit on a 3.18 Dodge ram 1500

Question on the 95 dodge ram am putting a 96 transmission in it which is the electric shift in which I need to get the hydraulic?. So can't I just change the harness and ecu to match? 95 engine 96 trans should all the connectors be the same? Or no

question, what transmission can i use on a 1996 ram 1500, 5.9L w/OD? Better yet what years are compatible with it

I have a in great condition and it's for sale

Idk if that one will work but I have a 97 ram 1500 tranny if you need one I was keeping it as a spare for my truck but I'm willing to sell it to help you out

Referthejuggalo if you want to sell that trans i will buy it.!! Where are you located and how much are you asking for it??

I have a quetaion i have a 2001 3.9 liter dodge ram1500 what automatic transmission will work in it 2x4

What three speed overdrive transmission came out in the 1996 Dodge Ram 1/2 ton 5.9 engine

Automatic

What is the difference between a 46re and a 46rh?

I have a ? I have a 2000 Dodge ram 1500 4x4 with the 5.9 .n the transmissions is bad. Won't move at all. But I can feel it going into the different gears. But no movement .so can I just change the solenoids.in the pan do I need a rebuild

I dont have an answer i have a question... i have a 1998 dodge ram 1500 . 5.9 leader V8. Are the transmissions compatible with a 2002 Dodge Ram 1500 5.9 transmission..

Question, I have a 2003 dodge ram 1500 5.9 4x4 1/2ton with 3/4 ton rear end. Tranny moves until it gets hot then slips till doesnt move. I have a 2004 dodge ram 1500 5.7 2x4 ton tranny is good. Can I put the 2x4 on the 4x4?

I have a 2000 dodge ram 1500 sport v8 automatic 5.2 liter 2wd what size transmission would that be

46RE

I have a 1998 dodge ram 1500 2 wheel drive with 5.9 Eng. Can anyone tell me if my trans. is a 46RE????

Do you still have that tranny,

Frank, if you still have the tranny from the van and want to sell it still my phone number is 7192102750. Text 1st so I know it's u when you call