I have a 2001 dodge ram automatic and it won't drive forward(pushing gas all the way to the floor)but it does go into reverse.

I have a 2001 dodge ram automatic and it won't drive forward(pushing gas all the way to the floor)but it does go into reverse. 1 Answer

I have a 95 dodge ram that I am having problems with no reverse. The truck is not worth enough to drop a lot of money on a new or rebuilt transmission. Im not a mechanic, but like to tinker. The truck had issues with forward gears but reversed was working, I didnt have the money to fix so I let it sit for over 3 yrs. I decided to tinker with it, I replaced the control solenoid, filter and fluid. now all forward gears work great but when I put it into reverse, It will back up slowly on its own, but if I give it gas it just revs up like its in nuetral and it vibrates like its trying to back up but wont go. Fluid level is good, nothing was found in the pan (very little shavings). Could it be air in the lines? bands need to be adjusted? or what? 1 Answer

reverse issues

I have a Dodge Ram 1500. Last night i went to start it and all it did was click. I came home this morning it starts, but it will not run without the gas pressed. 1 Answer

After awhile it got to where it would idle rough. If I pressed the gas and let off it would die.

i have a 1998 dodge ram 1500 sport with a 5.9 gas motor. im trying to figure out what trans i have in the truck. the tag under the hood says bd48. when i look that up it shows for a diesel. so im not sure what trans i have. i cant find any tags on the trans at all but on the bell housing does have 064-2 if that helps any 3 Answers

i have a 1998 dodge ram 1500 sport with a 5.9 gas motor. im trying to figure out what trans i have in the truck. reverse went out this morning .the tag under the hood says bd48. when i look that up ...

Removed the catalytic converter on my 2007 Dodge ram at first it started but had to continuously give it gas to run and now it won't start at all. What could be wrong 1 Answer

Removed the catalytic converter on my 2007 Dodge ram at first it started but had to continuously give it gas to run and now it won't start at all. What could be wrong