I had a leaking head gasket on my 04 1500 5.7 hemi. I had heads checked and they were fine. I replaced all the gaskets on the top end. And now the truck won't start unless I hood the throttle to the f

I had a leaking head gasket on my 04 1500 5.7 hemi. I had heads checked and they were fine. I replaced all the gaskets on the top end. And now the truck won't start unless I hood the throttle to the f 2 Answers

replaced the heads and head gaskets on my dodge 1500 2005 5.7 liter quad cab 4x4. Put the engine back together and now it wont run unless I step on the gas and keep RPM's up. 5 Answers

After the engine was put back together it wont stay running. Replaced oxygen sensors and throttle body and egr valve. When we were putting the rods back in on the left side we mirrored the rods so it...

My 96 Dodge ram 1500 5.9l won't start, I replaced the fuel pump, cap and rotor....it turns over but won't fire...checked spark on coil wire and at the spark plug and had spark at both spots... 11 Answers

I tried starting fluid, and it still wouldn't fire...why won't my truck start?

When I get into the ram 1500 and start the truck, I step on my brake to pull the lever in gear andm will not move unless I let the insiode of the truck warm up, what's wrong 1 Answer

I start the truck, put my foot on the brake and push down, try to pull down shift lever and won't move until the truck at least inside is warmed up.

Up until yesterday the oil gauge in my 2001 Dodge Ram 1500 would go to 0 - the check gauges lite would come on and pressure would be restored just as quickly as it had been lost. Yesterday, the truck won't start at all - all gauges seem to be OK except the oil gauge - nothing happens when I turn the key. Could this be the oil pump? 5 Answers

2001 Dodge Ram 1500 Up until yesterday the oil gauge in my 2001 Dodge Ram 1500 would occasionally go to 0 - the check gauges lite would come on and pressure would be restored just as quickly as it h...