When I connect the starter to the battery, it cranks the engine.
We have replace the starter three times. Once the nuts are connected and tightened, and
the battery is connected, the starter runs continuously.
We have replace the starter three times. Once the nuts are connected and tightened, and the battery is connected, the starter runs continuously.
1999 Chevrolet Suburban K1500 4WD
-
Maintenance & Repair
I have a 96 suburban 2500 4x4 with a 454 it started today then died so when I went to start it right back up nothing no click nothing checked all the fuses there fine the battery cables are tight ...
1996 Chevrolet Suburban K2500 4WD
-
Maintenance & Repair
3 days ago I tried to start my 2002 Chev. Suburban, it didn't start and sounded like it wasn't getting any fuel. I have a fue injection pressure tester, connected it to the fuel rail and turned on th...
Chevrolet Suburban
-
Maintenance & Repair
Is it starter or battery
1998 Chevrolet Suburban K1500 4WD
-
Maintenance & Repair
I have a 1993 suburban and when I pour water in the radiator it floods out from under the truck in the middle what could it be
1993 Chevrolet Suburban C1500 RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.