You can. If you get a rubber gasket you should be fine without it, but with cork I would recommend using it.
Guru94L4BL answered 4 years ago
When charging the valve cover gasket on a madza cx7 07 do i need to use silicone on the gasket
Use a very thin layer of silicone without any extra that can end up plugging up oil passages.
the car is leaking on the drivers side.
2007 Mazda CX-7 Grand Touring
-
Maintenance & Repair
My end 2009 Mazda CX-7 with a 2.3 litre petrol engine + turbo stutters when I floor it while moving around 60 kmph. The engine is alright even if I floor it from rest. It's also alright if I step o...
2009 Mazda CX-7
-
Maintenance & Repair
I have put $1400.00 in repairs trying to get my vehicle fixed. First the check engine code said It had a misfire on the 4th cylinder, had a new fuel injector put on. Then it started to dye when slo...
2007 Mazda CX-7 Grand Touring
-
Maintenance & Repair
I own a mazda cx 7 2.2 diesel the d p f warning light continuously flashes although taken it to a local garage they are unable to set the the warning light, can any one assist with this problem or d...
2010 Mazda CX-7 s Touring AWD
-
Maintenance & Repair
One Found behind the guide of the timing chain. The other was found on the oil pan.
2008 Mazda CX-7
-
Maintenance & Repair
CarGurus has 35 nationwide CX-7 listings starting at $4,990.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.