Just changed water pump due to a bad pulley causing the belt to slip off. Now the heat is blowing cald air and the car starts to overheat. I refilled the coolant and the fan is kicking in.

Just changed water pump due to a bad pulley causing the belt to slip off. Now the heat is blowing cald air and the car starts to overheat. I refilled the coolant and the fan is kicking in. 1 Answer

95 corolla bolt on the crankshaft will not come off. I put a piece of metal in the top pulley and tried to turn the crankshaft bolt, I think the timing belt jumps. How do I keep the crankshaft from moveing so I can get the bolt off? 4 Answers

Need to get the bolt off the crankshaft pulley. The top pulley is locked in place and when I try removing the crankshaft pulley I think the timing belt jumps instead of the bolt coming off. I need to ...

my toyota corolla 2005 limited edition won't start. my mechanic removed the engine to fix a leak, he also changed the link bars and the lower arms of the car. Now it asking for a pin lock i don't have 6 Answers

my Toyota corolla 2005 limited edition won't start. my mechanic removed the engine to fix a leak, he also changed the link bars and the lower arms of the car. Now it asking for a pin lock i don't have...

is there an easy way to replace the water pump? 2 Answers

i went a got a new water pump because my old one froze and is leaking quite badly out the spindle that attaches to the pulley. is there an easy way to take the old one off? it is quite a tight fit alr...

question i'm still having the same problem my car is still popping out of fourth gear and now I have to hold it down in the fourth gear the whole time this is the third time my car has been in the shop first time they fix the shifter cables second time they fix the shifter fork and now they can't figure out what else it could be in they've had my at least a month and a half now 1 Answer

I'm getting very upset because this guy has not fix my problem after the third time what else should I do