2000 Saturn SL1 stalling with CEL codes P0302 (Cylinder 2 misfire) and P0410 (Secondary air injection)
I have a 2000 Saturn SL1 that has been stalling randomly when I'm at a light. Also
when I'm driving on the highway sometimes when I brake it will stay at that RPM and
rarely it has even gone higher for a second as if I was revving the engine! I think it
has a low idle (hovers around 600 RPM. It had a CEL with the codes P0130 (O2
Sensor Circuit Malfunction Bank 1 Sensor 1.) and P0410 - Secondary Air Injection
System Malfunction.
I replaced the O2 sensor and had the light reset. It came back on a few hours later
and when I got it checked the same lights were on along with three more:
P0300- random multiple misfire
P0302- Cylinder 2 misfire
P0133- HO2S Slow Response Bank 1 Sensor 1
I replaced the spark plugs, wires, and coils, and reset the light and I still got the
codes for the cylinder 2 misfire, and secondary air injection system.
Couple weeks later got it checked again and had the same codes show up but this
time it took around two days for the CEL to come back on. This time it only had the
secondary air injection code pop up.
One mechanic said my catalytic converter could be clogged. Another said I might not
be getting proper compression.
My question is could the cylinder 2 misfire have taken those two weeks to correct
itself after I replaced the spark plugs, wires, and coils (which didn’t look all that bad)?
Why would the O2 sensor code come up right after replacing it?
Any help would be greatly appreciated. Thanks.