A flashing check engine light and hesitations indicates misfires. Scan for the OBDii Trouble codes to determine what cylinder or cylinders are misfiring. At a minimum, I would replace all the spark plugs if they are original, and any coil or coils that show up during the scan of the vehicle. An auto part store can scan it for you for free or borrow one. Post the 4 digit codes back here if you want further help.
While driving on the road, I look at the instrument panel and the check engine light is flashing and then the cruise doesn't work. Although it stops flashing, it will happen again. Do you have any sug...
2004 Chevrolet Trailblazer LS 4WD
-
Maintenance & Repair
Engine light comes on and now it's flashing on and off, when I hit the gas it hesitates like doesn't want to pick up speed.
2007 Chevrolet Trailblazer LT 4WD
-
Maintenance & Repair
Fi ed om thermostats and O2 sensor due to codes thrown when my check engine light was on. Before the fix car tan cold and would stall if you put it into drive to quickly. Right after the fix in my ...
2003 Chevrolet Trailblazer LT 4WD
-
Maintenance & Repair
I have a flashing engine light that comes on when the motor is under any kind of strain. I've scanned it and it's reading P0300. Multiple cylinder misfire. I've replaced the plugs and it still exis...
2005 Chevrolet Trailblazer LT 4WD
-
Maintenance & Repair
For about a month my engine has been running hot when stopped at a light, but cools down to 210 after moving on. Now my service light is flashing intermittently and it starts choking down at a stop...
2003 Chevrolet Trailblazer LS RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.